Cat’s Connected Worker Puts Safety In a Hard Hat, Wearable Tag

Embedding tracking and communication capabilities into PPE just makes sense.

Cat says its new Connected Worker system, which will be available during the first quarter of 2022, combines smart wearable technology with the power of analytics to make workers safer. The system was developed by GuardHat.

Introduced at MINExpo this week, the Connected Worker consists of three major components: the wearable hardware, software that captures and reports data and an Internet of Things platform that receives field reports and alerts workers of potential safety risks.The system communicates evacuation orders, fall detections, SOS signals and geofence violations.

The lithium-ion battery backs last 8-12 hours and can be easily swapped out.
The lithium-ion battery backs last 8-12 hours and can be easily swapped out.GuardHatThe “wearable” part comes in two different forms: an HC1 Hardhat has an embedded GNSS chip that tells users where each wearer is on site. Users employing Ultra-Wideband systems can also track wearers indoors, offering 3D tracking (longitude, latitude and elevation) to quickly locate workers in an emergency. The hard hat features video and audio call, push-to-talk and offline geofence and recording capabilities.

According the the GuardHat website, the HC1 Hardhat is powered by a rear lithium-ion battery pack that provides 8-12 hours of power. The yellow brim is where most of the features reside. Buttons on the underside of the brim include a call button, volume, SOS, status/resolve, push-to-talk, channel change and power button. The maximum weight of the hard hat (with suspension) is 1 pound, 12.2 ounces.
Screen Shot 2021 09 13 At 12 47 29 Pm

The Cat Connected Worker TA1 tag offers GNSS and Bluetooth tracking outdoors.
The Cat Connected Worker TA1 tag offers GNSS and Bluetooth tracking outdoors.CaterpillarAnother wearable is the TA1 tag, which offers GNSS and Bluetooth tracking outdoors. The tag has SOS, evacuation and social distancing alerts and notifies workers of geofence breaches. The tag can also capture images and videos to report hazards that are automatically shared with the system’s safety control center (SCS) to teams can quickly develop geofences around the hazard. 

The system, part of Cat’s MineStar Detect portfolio, also has an Android smart phone app to monitor crews outdoors. It allows field managers to communicate with workers, issue SOS alerts, and can capture images and videos. 

Cat says Connected Worker creates a safety ecosystem at the mine site, capturing and storing data either in the cloud or on a local server for analysis. Using the SCS, managers can view worker location and data in near real-time to communicate unsafe situations to those in the field. Reports include event reporting, violations and emergency evacuations, location reports with heat signatures that designate highly traveled areas, sensor readings that include temperature, noise, humidity and pressure. 

Smart hard hats are gaining traction, especially in the mining sector. The SmartCap, now marketed by the Wenco International Mining Systems division of Hitachi Construction Machinery, attacks a different safety issue: fatigue. It measures alertness and fatigue by analyzing brain activity, often referred to as EEG. Alertness scores, early warning alerts and fatigue alarms are delivered via a smartphone app installed on rugged devices. 

Did you miss our previous article…